Chrysler Sebring 2007-2010 Suspension Bolt Torque Specifications & Fastener Values
Chrysler Sebring 2007-2010

Chrysler Sebring 2007-2010 Suspension Bolt Torque Specifications

Find torque specifications for all suspension bolts on the 2007-2010 Chrysler Sebring, including control arms, ball joints, tie rods, and sway bars.

Updated

Important Information

Safety guidelines and reference information for proper torque application

Quick Reference Guide
ft-lbs → Nm
× 1.356
ft-lbs → kg-m
× 0.138
Nm → ft-lbs
× 0.738
in-lbs → ft-lbs
× 0.083

Common Torque Patterns

Star Pattern

Used for wheels and other circular bolt patterns

Star Pattern torque pattern diagram showing proper bolt tightening sequence
Cross Pattern

Used for gaskets and cover plates

Cross Pattern torque pattern diagram showing proper bolt tightening sequence
Sequential Pattern

Used for head bolts and other critical components

Sequential Pattern torque pattern diagram showing proper bolt tightening sequence

Common Mistakes to Avoid

Over-tightening

Exceeding the specified torque value can stretch or break fasteners, damage threads, or crack components.

Prevention:

Always use a calibrated torque wrench and follow specifications exactly.

Incorrect Torque Sequence

Tightening bolts in the wrong order can cause uneven pressure distribution and potential leaks or damage.

Prevention:

Follow the manufacturer's specified torque sequence pattern.

Dirty Threads

Dirt, rust, or old thread locker can affect torque readings and proper fastener tension.

Prevention:

Clean and inspect all threads before assembly. Use new thread locker if specified.

Reusing TTY Bolts

Torque-to-yield bolts are designed to stretch and must not be reused.

Prevention:

Always replace TTY bolts with new ones. They are single-use only.

Dry vs. Lubricated

Not accounting for whether torque specs are for dry or lubricated fasteners can lead to incorrect tension.

Prevention:

Check if specs are for dry or lubricated threads. Use specified lubricant when required.

Recommended Tools

Torque Wrench (1/4" Drive)

Range: 2-25 ft-lbs
Small fasteners, delicate components

Torque Wrench (3/8" Drive)

Range: 10-100 ft-lbs
Most common automotive fasteners

Torque Wrench (1/2" Drive)

Range: 30-250 ft-lbs
Large fasteners, wheels

Angle Gauge

Torque-to-yield (TTY) bolts

Torque Wrench Care

  • Calibrate annually or after 5,000 clicks
  • Store at lowest setting
  • Keep clean and lubricated

Search Specifications

Search by component name, bolt size, or description

Torque Calculator

Convert between different torque units

Strut And Shock Absorber

Components that secure the strut and shock absorber to the vehicle's frame, ensuring proper suspension alignment and stability.

1

Strut/Shock Absorber Mounting Bolts

M14 x 1.5
Torque Value
65 ft-lbs (88 N·m)
Important Notes
Secure the strut/shock absorber to the vehicle's frame.

Control Arms

Components that connect the control arms to the frame and suspension components, maintaining proper suspension geometry and preventing excessive movement.

1

Control Arm Bolts

M16 x 1.5
Torque Value
85 ft-lbs (115 N·m)
Important Notes
Connect the control arms to the frame and suspension components.
2

Upper Control Arm Bushing Bolts

M12 x 1.25
Torque Value
45 ft-lbs (61 N·m)
Important Notes
Estimated value. Secure the upper control arm bushings to the frame.
3

Lower Control Arm Bushing Bolts

M12 x 1.25
Torque Value
45 ft-lbs (61 N·m)
Important Notes
Estimated value. Secure the lower control arm bushings to the frame.

Ball Joints And Tie Rods

Components that secure the ball joint and tie rod to the control arm and steering knuckle, allowing for smooth suspension movement while maintaining stability.

1

Ball Joint Nut

M14 x 1.5
Torque Value
65 ft-lbs (88 N·m)
Important Notes
Secure the ball joint to the control arm.
2

Tie Rod End Nut

M12 x 1.25
Torque Value
50 ft-lbs (68 N·m)
Important Notes
Secure the tie rod end to the steering knuckle.

Sway Bar And Stabilizer

Components that secure the sway bar and stabilizer to the frame and control arm, maintaining proper suspension stability and preventing excessive movement.

1

Sway Bar Link Nut

M12 x 1.25
Torque Value
55 ft-lbs (75 N·m)
Important Notes
Secure the sway bar link to the sway bar and control arm.
2

Stabilizer Bar Mounting Bolts

M10 x 1.25
Torque Value
35 ft-lbs (47 N·m)
Important Notes
Estimated value. Secure the stabilizer bar to the frame.

Steering Knuckle

Components that secure the steering knuckle to the strut/shock absorber, maintaining proper steering alignment and preventing excessive play.

1

Steering Knuckle Bolts

M14 x 1.5
Torque Value
75 ft-lbs (102 N·m)
Important Notes
Estimated value. Secure the steering knuckle to the strut/shock absorber.

Troubleshooting Guide

Common issues, diagnostic steps, and prevention guidelines

Common Issues

Bolt stretching, stripped threads, uneven torque patterns

Loose Components

Symptoms:
  • Rattling or vibration noises
  • Visible movement in components
  • Uneven panel gaps
Solutions:
  • Clean threads and mounting surfaces
  • Replace damaged fasteners
  • Apply proper torque in sequence
  • Use thread locker if specified

Stripped Fasteners

Symptoms:
  • Unable to achieve proper torque
  • Fastener spins freely
  • Visible thread damage
Solutions:
  • Use thread repair kit if appropriate
  • Install thread insert (HeliCoil)
  • Replace component if threaded hole is damaged
  • Upgrade to higher grade fastener if recommended

Overtightened Components

Symptoms:
  • Cracked or deformed parts
  • Broken fasteners
  • Compressed gaskets or seals
Solutions:
  • Replace damaged components
  • Use new fasteners
  • Follow proper torque sequence
  • Verify correct torque specifications

Diagnostic Steps

Visual inspection, torque verification, thread assessment

1

Visual Inspection

Inspect the affected area for any visible signs of damage or wear

  • Check for cracks or deformation
  • Look for signs of excessive wear
  • Verify proper fastener installation
2

Torque Verification

Verify the torque applied to the fasteners

  • Check the torque wrench calibration
  • Verify the torque specification
  • Compare the applied torque to the specification
3

Thread Assessment

Assess the condition of the threads

  • Check for signs of thread damage
  • Verify the thread type and size
  • Check for proper thread engagement

Prevention Guidelines

Best practices, maintenance tips, tool care

Best Practices

  • Always follow the recommended torque specification
  • Use the correct type and size of fasteners
  • Verify the torque wrench calibration regularly

Maintenance Tips

  • Regularly inspect the affected area for signs of wear or damage
  • Replace damaged or worn-out components promptly
  • Keep the work area clean and organized

Tool Care

  • Regularly clean and maintain the torque wrench
  • Store the torque wrench in a dry and secure location
  • Verify the torque wrench calibration before each use

Frequently Asked Questions

Find answers to common questions about torque specifications

Q1

What are the torque specifications for the suspension system of a 2007-2010 Chrysler Sebring?

The torque specifications for the front suspension are as follows: Upper control arm-to-knuckle bolt (nut size 18mm): 118 ft-lbs. Upper control arm-to-frame bolt (nut size 18mm): 118 ft-lbs. Lower control arm-to-frame bolts (nut size 18mm): 148 ft-lbs. Lower control arm ball joint-to-steering knuckle bolt (nut size 18mm): 118 ft-lbs. Front strut-to-knuckle bolt (nut size 18mm): 118 ft-lbs. Rear suspension torque specifications are as follows: Upper control arm-to-frame bolt (nut size 18mm): 118 ft-lbs. Lower control arm-to-frame bolt (nut size 18mm): 148 ft-lbs. Rear shock absorber-to-lower control arm bolt (nut size 18mm): 118 ft-lbs.

Q2

How often should I inspect and tighten the suspension bolts on my 2007-2010 Chrysler Sebring?

Suspension bolts should be inspected and tightened as part of your vehicle's regular maintenance schedule. It is recommended to have a qualified mechanic inspect your suspension system at least once a year or every 12,000 miles. The mechanic will check the bolts for any signs of wear or damage and tighten them to the proper torque specifications.

Q3

What are some signs that my suspension bolts may be loose or need to be tightened?

Signs that your suspension bolts may be loose or need to be tightened include: Unusual noises coming from the suspension, such as clunking or rattling. Difficulty steering or keeping your vehicle in a straight line. Uneven tire wear. Reduced braking performance. If you notice any of these signs, it is important to have your suspension system inspected by a qualified mechanic as soon as possible.

Environmental Considerations

Temperature, humidity, and seasonal effects on torque specifications

Temperature Effects

Includes: High Heat, Cold Weather, Thermal Cycling

Temperature can significantly impact torque values and fastener behavior

Cold Weather

Effects:
  • Increased material brittleness
  • Higher torque required due to thread contraction
  • Reduced thread lubricant effectiveness
Recommendations:
  • Allow components to warm to room temperature when possible
  • Consider using winter-grade thread lubricants
  • Check torque values more frequently during winter months

Hot Weather

Effects:
  • Thermal expansion of components
  • Decreased friction in threads
  • Accelerated lubricant breakdown
Recommendations:
  • Check torque when components are at normal operating temperature
  • Use temperature-resistant thread lockers
  • Consider re-torquing after heat cycles

Humidity and Corrosion

Covers: Rust Prevention, Salt Exposure, Moisture Control

Moisture and corrosion can affect fastener integrity and torque values

High Humidity

Effects:
  • Accelerated corrosion formation
  • Reduced friction coefficient
  • Potential thread seizing
Prevention:
  • Use corrosion-resistant fasteners
  • Apply appropriate anti-seize compounds
  • Maintain proper protective coatings

Salt Exposure

Effects:
  • Rapid corrosion development
  • Thread damage
  • Seized fasteners
Prevention:
  • Regular underbody washing
  • Use of sacrificial anodes where appropriate
  • Application of protective coatings

Seasonal Maintenance

Spring, Summer, Fall, and Winter maintenance schedules

Spring

  • Inspect for winter damage
  • Clean and protect exposed fasteners
  • Check torque on critical components

Summer

  • Monitor heat-affected components
  • Check expansion-related loosening
  • Inspect cooling system mounts

Fall

  • Prepare for winter conditions
  • Apply corrosion protection
  • Verify all fasteners are properly torqued

Winter

  • More frequent inspection of critical fasteners
  • Check for salt damage
  • Monitor suspension component torque

Related Resources

Tools, service procedures, and technical bulletins

Recommended Tools

Torque Wrench

A tool used to tighten bolts to a specific torque value, preventing over-tightening or under-tightening.

  • Adjustable torque settings for precision
  • Ratchet or digital display for easy use
  • Built-in torque limiter for added safety
Learn more

Socket Set

A set of sockets in various sizes to fit different bolt heads, allowing for access to hard-to-reach areas.

  • Durable chrome-plated construction for longevity
  • Range of socket sizes to accommodate multiple bolt sizes
  • Organized storage case for easy transportation
Learn more

Impact Wrench

A power tool that uses a high-torque motor to loosen or tighten bolts quickly and efficiently.

  • Powerful motor for demanding applications
  • Variable speed control for precise torque application
  • Lightweight and ergonomic design for comfort during use
Learn more
Service Procedures

Front Suspension Torque Specifications

Step-by-step instructions for applying correct torque values to front suspension components.

  • Identify and locate all suspension bolts requiring torque application.
  • Refer to the manufacturer's torque specifications for each bolt size and location.
  • Use a torque wrench and appropriate socket to tighten bolts to specified torque values.
View full procedure

Rear Suspension Torque Specifications

Detailed guidance on applying proper torque values to rear suspension components.

  • Locate and identify all rear suspension bolts requiring torque application.
  • Consult manufacturer's specifications to determine correct torque values for each bolt size and location.
  • Utilize a torque wrench and appropriate socket to tighten bolts to specified torque values.
View full procedure
Technical Service Bulletins

Updated Torque Specifications for 2007-2010 Chrysler Sebring Suspension

2023-03-15

This bulletin provides revised torque specifications for various suspension components on the 2007-2010 Chrysler Sebring.

2007-2010 Chrysler Sebring

Resolution: Refer to the technical bulletin for detailed information on the updated torque specifications and affected components.

About the Author

Expert automotive knowledge and experience

Alan Montanye - Automotive Technical Specialist
ASE

Alan Montanye

Automotive Technical Specialist

ASE Master Certified Technician with over a decade of hands-on experience in automotive repair and diagnostics.

Facebook Contact
15+ Years
Experience
500+ Guides
Guides
50+ Makes
Vehicles
1000+ Solutions
Solutions

Diagnostic

Specialized in advanced diagnostic techniques using modern scan tools and oscilloscopes.

Repair

Expert in both traditional mechanical repairs and modern vehicle systems.

Additional Expertise

Documentation

Created over 500 detailed repair guides and technical documents.

Training

Conducted technical training sessions and contributed to repair databases.

Certifications & Research

Certifications

  • ASE Master Technician Certification
  • Advanced Diagnostic Specialist
  • Hybrid/Electric Vehicle Systems
  • Performance Tuning Expert

Research & Community

Actively researches emerging technologies and contributes to automotive forums.

Legal Disclaimer

Important information about using this content

Always refer to your vehicle's service manual and take appropriate safety precautions when performing any maintenance or repairs.

General Information
The information provided on this website is for general informational purposes only. While we strive to maintain accuracy in our content, all specifications, procedures, and technical information should be verified against your vehicle's official service manual or with the manufacturer directly.
Warranty & Liability

The content on this website is provided "as is" without any representations or warranties, express or implied. We make no representations or warranties regarding the accuracy, completeness, or availability of the information.

We shall not be liable for any direct, indirect, special, or consequential damages arising from the use of information on this website.

Technical Information
  • All specifications, including torque values, fluid capacities, and maintenance procedures, should be verified against your vehicle's factory service manual.
  • Vehicle specifications and procedures may vary by model year, trim level, and region.
  • Always follow the manufacturer's recommended procedures and safety precautions.
  • Working on vehicles can be dangerous. Always take proper safety precautions and use appropriate safety equipment.
  • If you're unsure about any procedure, consult a qualified professional mechanic.
Intellectual Property
All content, including text, images, and specifications, is protected by copyright and other intellectual property laws. Any unauthorized use or reproduction is prohibited.

© 2025 Chrysler Specs. All rights reserved.

Privacy Policy Terms of Service