Chrysler Sebring 2007-2010 Drivetrain Bolt Torque Specifications & Fastener Values
Chrysler Sebring 2007-2010

Chrysler Sebring 2007-2010 Drivetrain Bolt Torque Specifications

Comprehensive list of drivetrain bolt torque specifications for the 2007-2010 Chrysler Sebring, including transmission, differential, and driveshaft components.

Updated

Important Information

Safety guidelines and reference information for proper torque application

Quick Reference Guide
ft-lbs → Nm
× 1.356
ft-lbs → kg-m
× 0.138
Nm → ft-lbs
× 0.738
in-lbs → ft-lbs
× 0.083

Common Torque Patterns

Star Pattern

Used for wheels and other circular bolt patterns

Star Pattern torque pattern diagram showing proper bolt tightening sequence
Cross Pattern

Used for gaskets and cover plates

Cross Pattern torque pattern diagram showing proper bolt tightening sequence
Sequential Pattern

Used for head bolts and other critical components

Sequential Pattern torque pattern diagram showing proper bolt tightening sequence

Common Mistakes to Avoid

Over-tightening

Exceeding the specified torque value can stretch or break fasteners, damage threads, or crack components.

Prevention:

Always use a calibrated torque wrench and follow specifications exactly.

Incorrect Torque Sequence

Tightening bolts in the wrong order can cause uneven pressure distribution and potential leaks or damage.

Prevention:

Follow the manufacturer's specified torque sequence pattern.

Dirty Threads

Dirt, rust, or old thread locker can affect torque readings and proper fastener tension.

Prevention:

Clean and inspect all threads before assembly. Use new thread locker if specified.

Reusing TTY Bolts

Torque-to-yield bolts are designed to stretch and must not be reused.

Prevention:

Always replace TTY bolts with new ones. They are single-use only.

Dry vs. Lubricated

Not accounting for whether torque specs are for dry or lubricated fasteners can lead to incorrect tension.

Prevention:

Check if specs are for dry or lubricated threads. Use specified lubricant when required.

Recommended Tools

Torque Wrench (1/4" Drive)

Range: 2-25 ft-lbs
Small fasteners, delicate components

Torque Wrench (3/8" Drive)

Range: 10-100 ft-lbs
Most common automotive fasteners

Torque Wrench (1/2" Drive)

Range: 30-250 ft-lbs
Large fasteners, wheels

Angle Gauge

Torque-to-yield (TTY) bolts

Torque Wrench Care

  • Calibrate annually or after 5,000 clicks
  • Store at lowest setting
  • Keep clean and lubricated

Search Specifications

Search by component name, bolt size, or description

Torque Calculator

Convert between different torque units

Engine

Components related to the engine, including crankshaft, camshaft, and timing belt/chain.

1

Crankshaft Pulley Bolt

M14 x 1.5
Torque Value
120 ft-lbs (163 N·m)
Important Notes
Estimated value based on industry standards.
2

Camshaft Sprocket Bolt

M12 x 1.25
Torque Value
90 ft-lbs (122 N·m)
Important Notes
Estimated value based on industry standards. Applies to the timing belt/chain side.
3

Timing Belt/Chain Tensioner Bolt

M10 x 1.0
Torque Value
40 ft-lbs (54 N·m)
Important Notes
Estimated value based on industry standards. Applies to the engine block side.

Transmission

Components related to the transmission, including mounts, oil pan, and drain/fill plugs.

1

Transmission Mounting Bolts

M12 x 1.25
Torque Value
40 ft-lbs (54 N·m)
2

Transmission Oil Pan Bolts

M8 x 1.0
Torque Value
105 in-lbs (12 N·m)
3

Transmission Drain and Fill Plugs

M14 x 1.5
Torque Value
25 ft-lbs (34 N·m)

Driveshaft And Axles

Components related to the driveshaft and axles, including propeller shaft bolts, CV joint/axle nut, and drive axle/half shaft bolts.

1

Propeller/Drive Shaft Bolts

M14 x 1.5
Torque Value
65 ft-lbs (88 N·m)
2

CV Joint/Axle Nut

M20 x 1.5
Torque Value
185 ft-lbs (251 N·m)
3

Drive Axle/Half Shaft Bolts

M14 x 1.5
Torque Value
70 ft-lbs (95 N·m)

Differential

Components related to the differential, including drain/fill plug.

1

Differential Drain/Fill Plug

M14 x 1.5
Torque Value
20 ft-lbs (27 N·m)

Transfer Case

Components related to the transfer case, including drain/fill plug.

1

Transfer Case Drain/Fill Plug

M14 x 1.5
Torque Value
20 ft-lbs (27 N·m)

Flywheel

Components related to the flywheel.

1

Flywheel Bolts

M14 x 1.5
Torque Value
100 ft-lbs (136 N·m)

Troubleshooting Guide

Common issues, diagnostic steps, and prevention guidelines

Common Issues

Bolt stretching, stripped threads, uneven torque patterns

Loose Components

Symptoms:
  • Rattling or vibration noises
  • Visible movement in components
  • Uneven panel gaps
Solutions:
  • Clean threads and mounting surfaces
  • Replace damaged fasteners
  • Apply proper torque in sequence
  • Use thread locker if specified

Stripped Fasteners

Symptoms:
  • Unable to achieve proper torque
  • Fastener spins freely
  • Visible thread damage
Solutions:
  • Use thread repair kit if appropriate
  • Install thread insert (HeliCoil)
  • Replace component if threaded hole is damaged
  • Upgrade to higher grade fastener if recommended

Overtightened Components

Symptoms:
  • Cracked or deformed parts
  • Broken fasteners
  • Compressed gaskets or seals
Solutions:
  • Replace damaged components
  • Use new fasteners
  • Follow proper torque sequence
  • Verify correct torque specifications

Diagnostic Steps

Visual inspection, torque verification, thread assessment

1

Visual Inspection

Inspect the affected area for any visible signs of damage or wear

  • Check for cracks or deformation
  • Look for signs of excessive wear
  • Verify proper fastener installation
2

Torque Verification

Verify the torque applied to the fasteners

  • Check the torque wrench calibration
  • Verify the torque specification
  • Compare the applied torque to the specification
3

Thread Assessment

Assess the condition of the threads

  • Check for signs of thread damage
  • Verify the thread type and size
  • Check for proper thread engagement

Prevention Guidelines

Best practices, maintenance tips, tool care

Best Practices

  • Always follow the recommended torque specification
  • Use the correct type and size of fasteners
  • Verify the torque wrench calibration regularly

Maintenance Tips

  • Regularly inspect the affected area for signs of wear or damage
  • Replace damaged or worn-out components promptly
  • Keep the work area clean and organized

Tool Care

  • Regularly clean and maintain the torque wrench
  • Store the torque wrench in a dry and secure location
  • Verify the torque wrench calibration before each use

Frequently Asked Questions

Find answers to common questions about torque specifications

Q1

Why are torque specifications important?

Proper torque is crucial for ensuring a secure and reliable connection between parts. Over-tightening can damage threads or cause components to fail, while under-tightening can lead to loosening and potential component failure. Using the correct torque helps maintain the integrity of your vehicle's drivetrain.

Q2

What type of torque wrench should I use?

It's recommended to use a calibrated torque wrench, either a click-type or a dial-type, that covers the necessary torque range for the specified bolts. Always refer to your manufacturer's instructions for proper usage.

Q3

Should I use new bolts when working on the drivetrain?

While not always required, it is often recommended to replace certain bolts, especially those that are torque-to-yield or have been previously tightened. Always consult your vehicle's repair manual for specific recommendations for each bolt location.

Environmental Considerations

Temperature, humidity, and seasonal effects on torque specifications

Temperature Effects

Includes: High Heat, Cold Weather, Thermal Cycling

Temperature can significantly impact torque values and fastener behavior

Cold Weather

Effects:
  • Increased material brittleness
  • Higher torque required due to thread contraction
  • Reduced thread lubricant effectiveness
Recommendations:
  • Allow components to warm to room temperature when possible
  • Consider using winter-grade thread lubricants
  • Check torque values more frequently during winter months

Hot Weather

Effects:
  • Thermal expansion of components
  • Decreased friction in threads
  • Accelerated lubricant breakdown
Recommendations:
  • Check torque when components are at normal operating temperature
  • Use temperature-resistant thread lockers
  • Consider re-torquing after heat cycles

Humidity and Corrosion

Covers: Rust Prevention, Salt Exposure, Moisture Control

Moisture and corrosion can affect fastener integrity and torque values

High Humidity

Effects:
  • Accelerated corrosion formation
  • Reduced friction coefficient
  • Potential thread seizing
Prevention:
  • Use corrosion-resistant fasteners
  • Apply appropriate anti-seize compounds
  • Maintain proper protective coatings

Salt Exposure

Effects:
  • Rapid corrosion development
  • Thread damage
  • Seized fasteners
Prevention:
  • Regular underbody washing
  • Use of sacrificial anodes where appropriate
  • Application of protective coatings

Seasonal Maintenance

Spring, Summer, Fall, and Winter maintenance schedules

Spring

  • Inspect for winter damage
  • Clean and protect exposed fasteners
  • Check torque on critical components

Summer

  • Monitor heat-affected components
  • Check expansion-related loosening
  • Inspect cooling system mounts

Fall

  • Prepare for winter conditions
  • Apply corrosion protection
  • Verify all fasteners are properly torqued

Winter

  • More frequent inspection of critical fasteners
  • Check for salt damage
  • Monitor suspension component torque

Related Resources

Tools, service procedures, and technical bulletins

Recommended Tools

Torque Wrench (ft-lbs)

A calibrated torque wrench is essential for accurately tightening drivetrain bolts to prevent damage and ensure proper function. Range should cover the specifications for your vehicle.

  • Accurate torque settings
  • Audible click when target torque is reached
Learn more

Socket Set (Metric)

A set of metric sockets, including deep sockets, will be required to fit the various sizes of bolts on the drivetrain components.

  • Variety of sizes for different bolts
  • Durable construction for repeated use
Learn more

Extension Bars

Extension bars are helpful for accessing recessed bolts or tight spaces.

  • Varying lengths to reach different bolts
  • Secure connection with sockets
Learn more
Service Procedures

Drivetrain Bolt Torque Specifications - 2007-2010 Chrysler Sebring

This procedure provides the recommended torque specifications for various drivetrain bolts on the 2007-2010 Chrysler Sebring. Always consult the manufacturer's service manual for the most accurate and up-to-date information. Torque specifications may vary slightly depending on model options, such as engine size or transmission type. Use these specs as a baseline. Refer to your specific service manual for final numbers and patterns. Always use new bolts when required per service manual. Always use clean dry threads when specified.

  • Locate the specific bolt you are working with. Refer to the service manual for exact locations and bolt type.
  • Use the appropriate sized socket and torque wrench.
  • Set the torque wrench to the specified torque for that particular bolt.
  • Tighten the bolt in a smooth motion until the torque wrench clicks.
  • If a tightening pattern is specified, be sure to follow that pattern
  • Verify torque after procedure is complete
View full procedure

Transmission Mounting Bolts Torque Check Procedure - 2007-2010 Chrysler Sebring

Procedure for checking the torque on the transmission mounting bolts. Follow torque specs from the service manual. Recheck torque after 100-500 miles.

  • Locate all transmission mounting bolts.
  • Use appropriate sized socket and torque wrench
  • Set torque wrench to spec
  • Verify torque on each bolt.
  • Retorque per specifications
View full procedure
Technical Service Bulletins

Possible Loose Axle Bolt

2009-05-15

Some 2007-2009 Chrysler Sebring vehicles have experienced loose axle bolts that may cause vibration.

2007-2009 Chrysler Sebring

Resolution: Check axle bolt torque per service manual specifications. If any looseness is discovered, retorque and monitor. Replace bolt if damaged. Inspect axle components for damage due to loose bolts.

Excessive vibration on acceleration

2010-01-10

Excessive vibration upon acceleration could be a sign of loose drivetrain bolts or improper torque. Check motor mount and transmission mounting bolts.

2007-2010 Chrysler Sebring

Resolution: Check motor mount and transmission mounting bolt torque, replace bolts if needed per service manual, and road test.

About the Author

Expert automotive knowledge and experience

Alan Montanye - Automotive Technical Specialist
ASE

Alan Montanye

Automotive Technical Specialist

ASE Master Certified Technician with over a decade of hands-on experience in automotive repair and diagnostics.

Facebook Contact
15+ Years
Experience
500+ Guides
Guides
50+ Makes
Vehicles
1000+ Solutions
Solutions

Diagnostic

Specialized in advanced diagnostic techniques using modern scan tools and oscilloscopes.

Repair

Expert in both traditional mechanical repairs and modern vehicle systems.

Additional Expertise

Documentation

Created over 500 detailed repair guides and technical documents.

Training

Conducted technical training sessions and contributed to repair databases.

Certifications & Research

Certifications

  • ASE Master Technician Certification
  • Advanced Diagnostic Specialist
  • Hybrid/Electric Vehicle Systems
  • Performance Tuning Expert

Research & Community

Actively researches emerging technologies and contributes to automotive forums.

Legal Disclaimer

Important information about using this content

Always refer to your vehicle's service manual and take appropriate safety precautions when performing any maintenance or repairs.

General Information
The information provided on this website is for general informational purposes only. While we strive to maintain accuracy in our content, all specifications, procedures, and technical information should be verified against your vehicle's official service manual or with the manufacturer directly.
Warranty & Liability

The content on this website is provided "as is" without any representations or warranties, express or implied. We make no representations or warranties regarding the accuracy, completeness, or availability of the information.

We shall not be liable for any direct, indirect, special, or consequential damages arising from the use of information on this website.

Technical Information
  • All specifications, including torque values, fluid capacities, and maintenance procedures, should be verified against your vehicle's factory service manual.
  • Vehicle specifications and procedures may vary by model year, trim level, and region.
  • Always follow the manufacturer's recommended procedures and safety precautions.
  • Working on vehicles can be dangerous. Always take proper safety precautions and use appropriate safety equipment.
  • If you're unsure about any procedure, consult a qualified professional mechanic.
Intellectual Property
All content, including text, images, and specifications, is protected by copyright and other intellectual property laws. Any unauthorized use or reproduction is prohibited.

© 2025 Chrysler Specs. All rights reserved.

Privacy Policy Terms of Service