Chrysler Sebring 2007-2010 Body Panel & Frame Bolt Torque Specifications
Chrysler Sebring 2007-2010

Chrysler Sebring 2007-2010 Body & Frame Bolt Torque Specifications

Detailed torque specifications for body bolts on the 2007-2010 Chrysler Sebring. Includes front and rear panels, door hinges, and other body attachment points.

Updated

Important Information

Safety guidelines and reference information for proper torque application

Quick Reference Guide
ft-lbs → Nm
× 1.356
ft-lbs → kg-m
× 0.138
Nm → ft-lbs
× 0.738
in-lbs → ft-lbs
× 0.083

Common Torque Patterns

Star Pattern

Used for wheels and other circular bolt patterns

Star Pattern torque pattern diagram showing proper bolt tightening sequence
Cross Pattern

Used for gaskets and cover plates

Cross Pattern torque pattern diagram showing proper bolt tightening sequence
Sequential Pattern

Used for head bolts and other critical components

Sequential Pattern torque pattern diagram showing proper bolt tightening sequence

Common Mistakes to Avoid

Over-tightening

Exceeding the specified torque value can stretch or break fasteners, damage threads, or crack components.

Prevention:

Always use a calibrated torque wrench and follow specifications exactly.

Incorrect Torque Sequence

Tightening bolts in the wrong order can cause uneven pressure distribution and potential leaks or damage.

Prevention:

Follow the manufacturer's specified torque sequence pattern.

Dirty Threads

Dirt, rust, or old thread locker can affect torque readings and proper fastener tension.

Prevention:

Clean and inspect all threads before assembly. Use new thread locker if specified.

Reusing TTY Bolts

Torque-to-yield bolts are designed to stretch and must not be reused.

Prevention:

Always replace TTY bolts with new ones. They are single-use only.

Dry vs. Lubricated

Not accounting for whether torque specs are for dry or lubricated fasteners can lead to incorrect tension.

Prevention:

Check if specs are for dry or lubricated threads. Use specified lubricant when required.

Recommended Tools

Torque Wrench (1/4" Drive)

Range: 2-25 ft-lbs
Small fasteners, delicate components

Torque Wrench (3/8" Drive)

Range: 10-100 ft-lbs
Most common automotive fasteners

Torque Wrench (1/2" Drive)

Range: 30-250 ft-lbs
Large fasteners, wheels

Angle Gauge

Torque-to-yield (TTY) bolts

Torque Wrench Care

  • Calibrate annually or after 5,000 clicks
  • Store at lowest setting
  • Keep clean and lubricated

Search Specifications

Search by component name, bolt size, or description

Torque Calculator

Convert between different torque units

Suspension

Components that ensure proper suspension alignment, stability, and movement.

1

Strut/Shock Absorber Mounting Bolts

M14 x 1.5
Torque Value
65 ft-lbs (88 N·m)
Important Notes
Secure the strut/shock absorbers to the vehicle's body.
2

Control Arm Bolts

M16 x 1.5
Torque Value
85 ft-lbs (115 N·m)
Important Notes
Attach the control arms to the vehicle's body.
3

Ball Joint Nut

M12 x 1.25
Torque Value
65 ft-lbs (88 N·m)
Important Notes
Secure the ball joint to the control arm.
4

Tie Rod End Nut

M10 x 1.25
Torque Value
50 ft-lbs (68 N·m)
Important Notes
Attach the tie rod end to the steering gear.
5

Sway Bar Link Nut

M12 x 1.25
Torque Value
55 ft-lbs (75 N·m)
Important Notes
Secure the sway bar link to the sway bar.

Steering

Components that ensure proper steering alignment and movement.

1

Steering Gear/Rack Bolts

M14 x 1.5
Torque Value
100 ft-lbs (136 N·m)
Important Notes
Attach the steering gear/rack to the vehicle's body.

Body and frame

Components that ensure proper body and frame alignment and stability.

1

Body Mount Bolts

M12 x 1.25
Torque Value
45 ft-lbs (61 N·m)
Important Notes
Estimated value. Secure the vehicle's body to the frame.
2

Hood Hinge Bolts

M8 x 1.25
Torque Value
25 ft-lbs (34 N·m)
Important Notes
Estimated value. Attach the hood hinges to the vehicle's body.
3

Door Hinge Bolts

M8 x 1.25
Torque Value
25 ft-lbs (34 N·m)
Important Notes
Estimated value. Attach the door hinges to the vehicle's body.
4

Trunk Lid Hinge Bolts

M8 x 1.25
Torque Value
25 ft-lbs (34 N·m)
Important Notes
Estimated value. Attach the trunk lid hinges to the vehicle's body.
5

Bumper Mounting Bolts

M10 x 1.25
Torque Value
35 ft-lbs (47 N·m)
Important Notes
Estimated value. Secure the bumper to the vehicle's body.

Troubleshooting Guide

Common issues, diagnostic steps, and prevention guidelines

Common Issues

Bolt stretching, stripped threads, uneven torque patterns

Loose Components

Symptoms:
  • Rattling or vibration noises
  • Visible movement in components
  • Uneven panel gaps
Solutions:
  • Clean threads and mounting surfaces
  • Replace damaged fasteners
  • Apply proper torque in sequence
  • Use thread locker if specified

Stripped Fasteners

Symptoms:
  • Unable to achieve proper torque
  • Fastener spins freely
  • Visible thread damage
Solutions:
  • Use thread repair kit if appropriate
  • Install thread insert (HeliCoil)
  • Replace component if threaded hole is damaged
  • Upgrade to higher grade fastener if recommended

Overtightened Components

Symptoms:
  • Cracked or deformed parts
  • Broken fasteners
  • Compressed gaskets or seals
Solutions:
  • Replace damaged components
  • Use new fasteners
  • Follow proper torque sequence
  • Verify correct torque specifications

Diagnostic Steps

Visual inspection, torque verification, thread assessment

1

Visual Inspection

Inspect the affected area for any visible signs of damage or wear

  • Check for cracks or deformation
  • Look for signs of excessive wear
  • Verify proper fastener installation
2

Torque Verification

Verify the torque applied to the fasteners

  • Check the torque wrench calibration
  • Verify the torque specification
  • Compare the applied torque to the specification
3

Thread Assessment

Assess the condition of the threads

  • Check for signs of thread damage
  • Verify the thread type and size
  • Check for proper thread engagement

Prevention Guidelines

Best practices, maintenance tips, tool care

Best Practices

  • Always follow the recommended torque specification
  • Use the correct type and size of fasteners
  • Verify the torque wrench calibration regularly

Maintenance Tips

  • Regularly inspect the affected area for signs of wear or damage
  • Replace damaged or worn-out components promptly
  • Keep the work area clean and organized

Tool Care

  • Regularly clean and maintain the torque wrench
  • Store the torque wrench in a dry and secure location
  • Verify the torque wrench calibration before each use

Frequently Asked Questions

Find answers to common questions about torque specifications

Q1

Why is it important to use the correct torque specifications for body bolts?

Using the correct torque specifications is crucial to ensure the structural integrity of the vehicle. Overtightening can damage bolts, threads, and surrounding components, leading to potential failures. Undertightening can result in loose panels, rattles, and reduced safety. Proper torque ensures a secure and lasting connection.

Q2

Where can I find additional information or more specific torque specs for certain body parts?

For more detailed specifications, it's recommended to consult the official Chrysler service manual for the 2007-2010 Sebring. These manuals are the most accurate source of information and may include torque specs for specific sub-components of the body. You may also find useful information on reputable online forums dedicated to Chrysler vehicles.

Q3

What type of tools should I use when torquing body bolts?

A torque wrench is essential for accurately tightening body bolts. It allows you to apply the precise amount of torque specified. Avoid using impact wrenches for final tightening as they can easily overtighten. Always use sockets that are the correct size and in good condition to prevent slippage and damage.

Environmental Considerations

Temperature, humidity, and seasonal effects on torque specifications

Temperature Effects

Includes: High Heat, Cold Weather, Thermal Cycling

Temperature can significantly impact torque values and fastener behavior

Cold Weather

Effects:
  • Increased material brittleness
  • Higher torque required due to thread contraction
  • Reduced thread lubricant effectiveness
Recommendations:
  • Allow components to warm to room temperature when possible
  • Consider using winter-grade thread lubricants
  • Check torque values more frequently during winter months

Hot Weather

Effects:
  • Thermal expansion of components
  • Decreased friction in threads
  • Accelerated lubricant breakdown
Recommendations:
  • Check torque when components are at normal operating temperature
  • Use temperature-resistant thread lockers
  • Consider re-torquing after heat cycles

Humidity and Corrosion

Covers: Rust Prevention, Salt Exposure, Moisture Control

Moisture and corrosion can affect fastener integrity and torque values

High Humidity

Effects:
  • Accelerated corrosion formation
  • Reduced friction coefficient
  • Potential thread seizing
Prevention:
  • Use corrosion-resistant fasteners
  • Apply appropriate anti-seize compounds
  • Maintain proper protective coatings

Salt Exposure

Effects:
  • Rapid corrosion development
  • Thread damage
  • Seized fasteners
Prevention:
  • Regular underbody washing
  • Use of sacrificial anodes where appropriate
  • Application of protective coatings

Seasonal Maintenance

Spring, Summer, Fall, and Winter maintenance schedules

Spring

  • Inspect for winter damage
  • Clean and protect exposed fasteners
  • Check torque on critical components

Summer

  • Monitor heat-affected components
  • Check expansion-related loosening
  • Inspect cooling system mounts

Fall

  • Prepare for winter conditions
  • Apply corrosion protection
  • Verify all fasteners are properly torqued

Winter

  • More frequent inspection of critical fasteners
  • Check for salt damage
  • Monitor suspension component torque

Related Resources

Tools, service procedures, and technical bulletins

Recommended Tools

Torque Wrench (1/2" Drive)

A 1/2" drive torque wrench is essential for accurately tightening body bolts to the correct specification.

  • Wide torque range (typically 20-150 ft-lbs)
  • Click-type mechanism for audible feedback
  • Calibrated for accuracy
Learn more

Socket Set (Metric)

A comprehensive set of metric sockets is needed to fit various sizes of body bolts.

  • Includes common sizes like 10mm, 13mm, 15mm, 18mm
  • Durable construction for repeated use
  • May include extensions and adaptors
Learn more

Penetrating Oil

Useful for loosening stubborn or corroded bolts before removal or re-torquing.

  • Helps to dissolve rust and corrosion
  • Reduces the risk of damaging bolts during removal
  • Improves tool grip
Learn more

Work Gloves

Protect your hands when working with tools and bolts.

  • Durable material for hand protection
  • Good grip for tool handling
  • Variety of sizes for optimal fit
Learn more
Service Procedures

General Body Bolt Torquing Procedure

This procedure outlines the general steps for torquing body bolts on a 2007-2010 Chrysler Sebring.

  • 1. Identify the specific bolt and its torque specification (refer to a service manual or database).
  • 2. Clean the bolt and threaded hole of any debris or corrosion.
  • 3. Apply a small amount of anti-seize compound to the bolt threads if necessary (particularly in areas prone to corrosion).
  • 4. Install the bolt by hand, making sure not to cross-thread it.
  • 5. Using the correct size socket, tighten the bolt with a torque wrench to the specified torque. In some instances, bolts should be torqued in a sequence to properly secure panels.
  • 6. Double check torque specifications and proper fastening after initial tightening.
  • 7. Re-check torque after a short period of use (e.g. after a test drive).
View full procedure

Door Hinge Bolt Torquing

Procedure for properly tightening door hinge bolts.

  • 1. Loosely install hinge bolts.
  • 2. Ensure proper door fitment. Adjust hinge if necessary.
  • 3. Torque hinge bolts to specified torque specification.
  • 4. Operate door to ensure proper opening and closing.
View full procedure
Technical Service Bulletins

Potential for Body Bolt Corrosion

2009-05-15

Some 2007-2010 Chrysler Sebring models may experience accelerated corrosion on body bolts, particularly in areas exposed to road salt or moisture.

2007-2010 Chrysler Sebring

Resolution: Inspect all body bolts for signs of corrosion. Clean any corroded bolts and apply anti-seize compound upon reinstallation. Replace any severely corroded bolts. Ensure that all bolts are torqued to specifications after cleaning and reassembly.

About the Author

Expert automotive knowledge and experience

Alan Montanye - Automotive Technical Specialist
ASE

Alan Montanye

Automotive Technical Specialist

ASE Master Certified Technician with over a decade of hands-on experience in automotive repair and diagnostics.

Facebook Contact
15+ Years
Experience
500+ Guides
Guides
50+ Makes
Vehicles
1000+ Solutions
Solutions

Diagnostic

Specialized in advanced diagnostic techniques using modern scan tools and oscilloscopes.

Repair

Expert in both traditional mechanical repairs and modern vehicle systems.

Additional Expertise

Documentation

Created over 500 detailed repair guides and technical documents.

Training

Conducted technical training sessions and contributed to repair databases.

Certifications & Research

Certifications

  • ASE Master Technician Certification
  • Advanced Diagnostic Specialist
  • Hybrid/Electric Vehicle Systems
  • Performance Tuning Expert

Research & Community

Actively researches emerging technologies and contributes to automotive forums.

Legal Disclaimer

Important information about using this content

Always refer to your vehicle's service manual and take appropriate safety precautions when performing any maintenance or repairs.

General Information
The information provided on this website is for general informational purposes only. While we strive to maintain accuracy in our content, all specifications, procedures, and technical information should be verified against your vehicle's official service manual or with the manufacturer directly.
Warranty & Liability

The content on this website is provided "as is" without any representations or warranties, express or implied. We make no representations or warranties regarding the accuracy, completeness, or availability of the information.

We shall not be liable for any direct, indirect, special, or consequential damages arising from the use of information on this website.

Technical Information
  • All specifications, including torque values, fluid capacities, and maintenance procedures, should be verified against your vehicle's factory service manual.
  • Vehicle specifications and procedures may vary by model year, trim level, and region.
  • Always follow the manufacturer's recommended procedures and safety precautions.
  • Working on vehicles can be dangerous. Always take proper safety precautions and use appropriate safety equipment.
  • If you're unsure about any procedure, consult a qualified professional mechanic.
Intellectual Property
All content, including text, images, and specifications, is protected by copyright and other intellectual property laws. Any unauthorized use or reproduction is prohibited.

© 2025 Chrysler Specs. All rights reserved.

Privacy Policy Terms of Service