Chrysler 200 2015-2017 Drivetrain Bolt Torque Specifications
This page provides detailed torque specifications for various drivetrain bolts on the 2015-2017 Chrysler 200, including transmission, axles, and differential components.
Important Information
Safety guidelines and reference information for proper torque application
Safety First
- Always verify torque specifications with your vehicle's factory service manual
- Use properly calibrated torque wrenches
- Replace all torque-to-yield (TTY) bolts - they are single-use only
- When in doubt, consult a professional mechanic
Quick Reference Guide
Quick Reference Guide
Common Torque Patterns
Star Pattern
Used for wheels and other circular bolt patterns
Cross Pattern
Used for gaskets and cover plates
Sequential Pattern
Used for head bolts and other critical components
Common Mistakes to Avoid
Common Mistakes to Avoid
Over-tightening
Exceeding the specified torque value can stretch or break fasteners, damage threads, or crack components.
Always use a calibrated torque wrench and follow specifications exactly.
Incorrect Torque Sequence
Tightening bolts in the wrong order can cause uneven pressure distribution and potential leaks or damage.
Follow the manufacturer's specified torque sequence pattern.
Dirty Threads
Dirt, rust, or old thread locker can affect torque readings and proper fastener tension.
Clean and inspect all threads before assembly. Use new thread locker if specified.
Reusing TTY Bolts
Torque-to-yield bolts are designed to stretch and must not be reused.
Always replace TTY bolts with new ones. They are single-use only.
Dry vs. Lubricated
Not accounting for whether torque specs are for dry or lubricated fasteners can lead to incorrect tension.
Check if specs are for dry or lubricated threads. Use specified lubricant when required.
Recommended Tools
Recommended Tools
Torque Wrench (1/4" Drive)
Torque Wrench (3/8" Drive)
Torque Wrench (1/2" Drive)
Angle Gauge
Torque Wrench Care
- Calibrate annually or after 5,000 clicks
- Store at lowest setting
- Keep clean and lubricated
Search Specifications
Search by component name, bolt size, or description
Torque Calculator
Convert between different torque units
Engine Flywheel
Torque specifications for components directly related to the engine's flywheel and crankshaft, which are primary parts of the drivetrain power source.
1 Flywheel Bolts
M12 x 1.25
Flywheel Bolts
M12 x 1.25Torque Value
Important Notes
2 Camshaft Sprocket Bolt
M10 x 1.25
Camshaft Sprocket Bolt
M10 x 1.25Torque Value
Important Notes
3 Crankshaft Pulley/Harmonic Balancer Bolt
M14 x 1.5
Crankshaft Pulley/Harmonic Balancer Bolt
M14 x 1.5Torque Value
Important Notes
Transmission Mounting
Torque specifications for bolts that secure the transmission to the engine and chassis, as well as case components.
1 Transmission Mounting Bolts
M12 x 1.75
Transmission Mounting Bolts
M12 x 1.75Torque Value
Important Notes
2 Transmission Bellhousing Bolts to Engine Block
M10 x 1.5
Transmission Bellhousing Bolts to Engine Block
M10 x 1.5Torque Value
Important Notes
3 Transmission Bellhousing Bolts to Engine Block (Smaller Bolts)
M8 x 1.25
Transmission Bellhousing Bolts to Engine Block (Smaller Bolts)
M8 x 1.25Torque Value
Important Notes
4 Transmission Oil Pan Bolts
M6 x 1.0
Transmission Oil Pan Bolts
M6 x 1.0Torque Value
Important Notes
5 Transmission Drain and Fill Plugs
M18 x 1.5
Transmission Drain and Fill Plugs
M18 x 1.5Torque Value
Important Notes
Driveshaft Axles
Torque specifications for bolts and nuts related to the driveshaft, drive axles, and CV joints.
1 Drive Axle/Half Shaft Bolts
M10 x 1.25
Drive Axle/Half Shaft Bolts
M10 x 1.25Torque Value
Important Notes
2 CV Joint/Axle Nut
M24 x 1.5
CV Joint/Axle Nut
M24 x 1.5Torque Value
Important Notes
3 Propeller/Drive Shaft Bolts
M10 x 1.25
Propeller/Drive Shaft Bolts
M10 x 1.25Torque Value
Important Notes
Differential Transfer
Torque specifications for bolts and plugs related to the differential and transfer case (if applicable).
1 Differential Mounting Bolts to Frame/Chassis
M12 x 1.75
Differential Mounting Bolts to Frame/Chassis
M12 x 1.75Torque Value
Important Notes
2 Differential Mounting Bolts to Frame/Chassis (Larger Bolts)
M14 x 1.5
Differential Mounting Bolts to Frame/Chassis (Larger Bolts)
M14 x 1.5Torque Value
Important Notes
3 Differential Drain/Fill Plug
M18 x 1.5
Differential Drain/Fill Plug
M18 x 1.5Torque Value
Important Notes
4 Transfer Case Drain/Fill Plug
M18 x 1.5
Transfer Case Drain/Fill Plug
M18 x 1.5Torque Value
Important Notes
Troubleshooting Guide
Common issues, diagnostic steps, and prevention guidelines
Common Issues
Bolt stretching, stripped threads, uneven torque patterns
Common Issues
Bolt stretching, stripped threads, uneven torque patterns
Loose Components
Symptoms:
- Rattling or vibration noises
- Visible movement in components
- Uneven panel gaps
Solutions:
- Clean threads and mounting surfaces
- Replace damaged fasteners
- Apply proper torque in sequence
- Use thread locker if specified
Stripped Fasteners
Symptoms:
- Unable to achieve proper torque
- Fastener spins freely
- Visible thread damage
Solutions:
- Use thread repair kit if appropriate
- Install thread insert (HeliCoil)
- Replace component if threaded hole is damaged
- Upgrade to higher grade fastener if recommended
Overtightened Components
Symptoms:
- Cracked or deformed parts
- Broken fasteners
- Compressed gaskets or seals
Solutions:
- Replace damaged components
- Use new fasteners
- Follow proper torque sequence
- Verify correct torque specifications
Diagnostic Steps
Visual inspection, torque verification, thread assessment
Diagnostic Steps
Visual inspection, torque verification, thread assessment
Visual Inspection
Inspect the affected area for any visible signs of damage or wear
- Check for cracks or deformation
- Look for signs of excessive wear
- Verify proper fastener installation
Torque Verification
Verify the torque applied to the fasteners
- Check the torque wrench calibration
- Verify the torque specification
- Compare the applied torque to the specification
Thread Assessment
Assess the condition of the threads
- Check for signs of thread damage
- Verify the thread type and size
- Check for proper thread engagement
Prevention Guidelines
Best practices, maintenance tips, tool care
Prevention Guidelines
Best practices, maintenance tips, tool care
Best Practices
- Always follow the recommended torque specification
- Use the correct type and size of fasteners
- Verify the torque wrench calibration regularly
Maintenance Tips
- Regularly inspect the affected area for signs of wear or damage
- Replace damaged or worn-out components promptly
- Keep the work area clean and organized
Tool Care
- Regularly clean and maintain the torque wrench
- Store the torque wrench in a dry and secure location
- Verify the torque wrench calibration before each use
Frequently Asked Questions
Find answers to common questions about torque specifications
Q1 Why is using the correct torque specifications important for drivetrain bolts?
Why is using the correct torque specifications important for drivetrain bolts?
Using the correct torque specification is crucial to ensure proper clamping force, which prevents bolts from loosening due to vibration or stress. Overtightening can damage threads and potentially lead to bolt failure or component damage. Undertightening will not properly secure the component, leading to premature wear and potential safety issues. For example, an incorrectly torqued axle nut could lead to wheel separation while driving.
Q2 Where can I find the specific torque specifications for my 2015-2017 Chrysler 200 drivetrain bolts?
Where can I find the specific torque specifications for my 2015-2017 Chrysler 200 drivetrain bolts?
The most accurate place to find the specific torque specifications for your 2015-2017 Chrysler 200 drivetrain bolts is in the official Chrysler service manual for that model year. This can often be purchased online, from a dealer, or accessed through a subscription service. Third-party repair guides may also provide the specs, but always double-check with the official manual if possible. The service manual will provide torque specs in both Newton-meters (Nm) and Foot-pounds (ft-lb).
Q3 What type of tools are recommended for torquing drivetrain bolts?
What type of tools are recommended for torquing drivetrain bolts?
A calibrated torque wrench is essential for accurately applying torque to drivetrain bolts. It's recommended to use a beam-type or click-type torque wrench with the appropriate range for the fasteners you are working with. You will likely need a set of standard sockets and possibly extensions to reach the various bolts. Avoid using impact guns or breaker bars to tighten bolts as these are generally not precise enough for torque-critical applications.
Q4 Should I use thread locker on drivetrain bolts?
Should I use thread locker on drivetrain bolts?
The service manual will specify when thread locker is required. Often, critical fasteners such as those on the drive shafts, transmission mounts, or engine mounts require thread locking compound to prevent loosening. Always use the specified type of thread locker (e.g., Loctite 242 - medium strength, or Loctite 271 - high strength) and allow sufficient curing time as specified by the manufacturer of the product before applying any load.
Q5 What should I do if I accidentally overtighten a drivetrain bolt?
What should I do if I accidentally overtighten a drivetrain bolt?
If you suspect you have overtightened a drivetrain bolt, the safest course of action is to replace the bolt and inspect the threads in the component for damage. Overtightening can stretch the bolt beyond its design limit, potentially leading to failure, and damage to threads. If the threads are damaged, the component may need to be repaired or replaced. It's better to be safe and replace the suspect bolt and follow proper torqueing procedures. Don't risk premature failure or a safety issue due to a compromised component.
Environmental Considerations
Temperature, humidity, and seasonal effects on torque specifications
Temperature Effects
Includes: High Heat, Cold Weather, Thermal Cycling
Temperature Effects
Includes: High Heat, Cold Weather, Thermal Cycling
Temperature can significantly impact torque values and fastener behavior
Cold Weather
Effects:
- Increased material brittleness
- Higher torque required due to thread contraction
- Reduced thread lubricant effectiveness
Recommendations:
- Allow components to warm to room temperature when possible
- Consider using winter-grade thread lubricants
- Check torque values more frequently during winter months
Hot Weather
Effects:
- Thermal expansion of components
- Decreased friction in threads
- Accelerated lubricant breakdown
Recommendations:
- Check torque when components are at normal operating temperature
- Use temperature-resistant thread lockers
- Consider re-torquing after heat cycles
Humidity and Corrosion
Covers: Rust Prevention, Salt Exposure, Moisture Control
Humidity and Corrosion
Covers: Rust Prevention, Salt Exposure, Moisture Control
Moisture and corrosion can affect fastener integrity and torque values
High Humidity
Effects:
- Accelerated corrosion formation
- Reduced friction coefficient
- Potential thread seizing
Prevention:
- Use corrosion-resistant fasteners
- Apply appropriate anti-seize compounds
- Maintain proper protective coatings
Salt Exposure
Effects:
- Rapid corrosion development
- Thread damage
- Seized fasteners
Prevention:
- Regular underbody washing
- Use of sacrificial anodes where appropriate
- Application of protective coatings
Seasonal Maintenance
Spring, Summer, Fall, and Winter maintenance schedules
Seasonal Maintenance
Spring, Summer, Fall, and Winter maintenance schedules
Spring
- Inspect for winter damage
- Clean and protect exposed fasteners
- Check torque on critical components
Summer
- Monitor heat-affected components
- Check expansion-related loosening
- Inspect cooling system mounts
Fall
- Prepare for winter conditions
- Apply corrosion protection
- Verify all fasteners are properly torqued
Winter
- More frequent inspection of critical fasteners
- Check for salt damage
- Monitor suspension component torque
Related Resources
Tools, service procedures, and technical bulletins
Recommended Tools
Torque Wrench (1/2" Drive)
A precision tool for tightening bolts to specific torque values. 1/2" drive is suitable for most drivetrain applications.
- Wide torque range
- Easy-to-read scale
- Click-type mechanism
Torque Wrench (3/8" Drive)
A smaller precision tool for tighter spaces and smaller bolts in the drivetrain assembly.
- Lower torque range than 1/2" drive
- Compact design
- Accurate readings
Socket Set (Metric)
A comprehensive set of metric sockets to fit the various bolt heads used in the Chrysler 200 drivetrain.
- Wide range of sizes
- Deep sockets for recessed bolts
- Durable construction
Wrench Set (Metric)
Open-end and box-end wrenches in metric sizes, for holding bolts and nuts.
- Various sizes
- Chrome vanadium steel
- Multiple styles
Extension bars and Universal Joints
Used with sockets to reach difficult fasteners.
- Varying lengths
- Flexible movement
- Durable material
Service Procedures
Front Axle Shaft Bolt Torque Specifications
Procedure for tightening the bolts securing the front axle shaft.
- Identify bolt locations.
- Tighten bolts to the manufacturer's specified torque specification (refer to a repair manual or service information for exact specs for the specific year/engine/transmission configuration).
- Recheck after a short test drive.
Transmission Mounting Bolt Torque Specifications
Procedure for tightening the transmission mounting bolts to the proper torque.
- Identify the correct mounting bolt locations.
- Tighten bolts to the manufacturer's specified torque specification (refer to a repair manual or service information for exact specs for the specific year/engine/transmission configuration).
- Double check all bolts are correctly torqued.
Driveshaft Bolt Torque Specifications
Procedure for tightening the driveshaft mounting bolts.
- Identify bolt locations.
- Tighten bolts to the manufacturer's specified torque specification (refer to a repair manual or service information for exact specs for the specific year/engine/transmission configuration).
- Double check all bolts are correctly torqued.
Rear Differential Bolt Torque Specifications (AWD Models)
Procedure for tightening the bolts on the rear differential.
- Identify the correct bolt locations.
- Tighten bolts to the manufacturer's specified torque specification (refer to a repair manual or service information for exact specs for the specific year/engine/transmission configuration).
- Double check all bolts are correctly torqued.
Wheel Hub/Bearing Bolt Torque Specifications
Procedure for tightening the wheel hub/bearing bolts to the proper torque.
- Identify the correct bolt locations.
- Tighten bolts to the manufacturer's specified torque specification (refer to a repair manual or service information for exact specs for the specific year/engine/transmission configuration).
- Double check all bolts are correctly torqued.
Technical Service Bulletins
Potential for Loose Drivetrain Bolts
2016-05-10Some early production models may experience loose drivetrain bolts due to improper torque application at the factory.
Resolution: Inspect all drivetrain mounting bolts and torque to specified specifications.
Driveline Vibration at High Speeds
2017-02-15Reported driveline vibrations at high speeds may be related to incorrect driveshaft bolt torques.
Resolution: Inspect and re-torque all driveshaft mounting bolts to the manufacturer's torque specification. If vibration persists, check for component damage and balance.
About the Author
Expert automotive knowledge and experience
'/%3E%3Cpath d='M60 30a20 20 0 1 1 0 40 20 20 0 0 1 0-40zm0 45c16.5 0 30 7.5 30 16.8V100H30v-8.2c0-9.3 13.5-16.8 30-16.8z' fill='%23404040'/%3E%3C/svg%3E)
Diagnostic
Specialized in advanced diagnostic techniques using modern scan tools and oscilloscopes.
Repair
Expert in both traditional mechanical repairs and modern vehicle systems.
Additional Expertise
Documentation
Created over 500 detailed repair guides and technical documents.
Training
Conducted technical training sessions and contributed to repair databases.
Certifications & Research
Certifications
- ASE Master Technician Certification
- Advanced Diagnostic Specialist
- Hybrid/Electric Vehicle Systems
- Performance Tuning Expert
Research & Community
Actively researches emerging technologies and contributes to automotive forums.
Legal Disclaimer
Important information about using this content
Always refer to your vehicle's service manual and take appropriate safety precautions when performing any maintenance or repairs.
General Information
Warranty & Liability
The content on this website is provided "as is" without any representations or warranties, express or implied. We make no representations or warranties regarding the accuracy, completeness, or availability of the information.
We shall not be liable for any direct, indirect, special, or consequential damages arising from the use of information on this website.
Technical Information
- All specifications, including torque values, fluid capacities, and maintenance procedures, should be verified against your vehicle's factory service manual.
- Vehicle specifications and procedures may vary by model year, trim level, and region.
- Always follow the manufacturer's recommended procedures and safety precautions.
- Working on vehicles can be dangerous. Always take proper safety precautions and use appropriate safety equipment.
- If you're unsure about any procedure, consult a qualified professional mechanic.