Chrysler 200 2011-2014 Drivetrain Bolt Torque Specifications & Fastener Values
Chrysler 200 2011-2014

Chrysler 200 2011-2014 Drivetrain Bolt Torque Specifications

Comprehensive list of torque specifications for drivetrain bolts on the 2011-2014 Chrysler 200, including transmission, differential, and driveshaft components.

Updated

Important Information

Safety guidelines and reference information for proper torque application

Quick Reference Guide
ft-lbs → Nm
× 1.356
ft-lbs → kg-m
× 0.138
Nm → ft-lbs
× 0.738
in-lbs → ft-lbs
× 0.083

Common Torque Patterns

Star Pattern

Used for wheels and other circular bolt patterns

Star Pattern torque pattern diagram showing proper bolt tightening sequence
Cross Pattern

Used for gaskets and cover plates

Cross Pattern torque pattern diagram showing proper bolt tightening sequence
Sequential Pattern

Used for head bolts and other critical components

Sequential Pattern torque pattern diagram showing proper bolt tightening sequence

Common Mistakes to Avoid

Over-tightening

Exceeding the specified torque value can stretch or break fasteners, damage threads, or crack components.

Prevention:

Always use a calibrated torque wrench and follow specifications exactly.

Incorrect Torque Sequence

Tightening bolts in the wrong order can cause uneven pressure distribution and potential leaks or damage.

Prevention:

Follow the manufacturer's specified torque sequence pattern.

Dirty Threads

Dirt, rust, or old thread locker can affect torque readings and proper fastener tension.

Prevention:

Clean and inspect all threads before assembly. Use new thread locker if specified.

Reusing TTY Bolts

Torque-to-yield bolts are designed to stretch and must not be reused.

Prevention:

Always replace TTY bolts with new ones. They are single-use only.

Dry vs. Lubricated

Not accounting for whether torque specs are for dry or lubricated fasteners can lead to incorrect tension.

Prevention:

Check if specs are for dry or lubricated threads. Use specified lubricant when required.

Recommended Tools

Torque Wrench (1/4" Drive)

Range: 2-25 ft-lbs
Small fasteners, delicate components

Torque Wrench (3/8" Drive)

Range: 10-100 ft-lbs
Most common automotive fasteners

Torque Wrench (1/2" Drive)

Range: 30-250 ft-lbs
Large fasteners, wheels

Angle Gauge

Torque-to-yield (TTY) bolts

Torque Wrench Care

  • Calibrate annually or after 5,000 clicks
  • Store at lowest setting
  • Keep clean and lubricated

Search Specifications

Search by component name, bolt size, or description

Torque Calculator

Convert between different torque units

Engine To Transmission

Torque specifications for components connecting the engine and transmission, including the flywheel, torque converter, and transmission mounting bolts.

1

Flywheel Bolts

M12 x 1.25
Important Notes
Apply torque in a star pattern. Ensure flywheel and crankshaft mating surfaces are clean and dry.
2

Torque Converter Bolts to Flywheel/Flexplate

M10 x 1.25
Torque Value
35 ft-lbs (47 N·m)
Important Notes
Ensure the torque converter is properly seated in the transmission before tightening bolts. Torque evenly in a star pattern.
3

Transmission to Engine Bolts

M12 x 1.75
Important Notes
Tighten the bolts gradually in a criss-cross pattern. Ensure proper alignment of transmission to the engine block.
4

Transmission Mounting Bolts

M10 x 1.5
Torque Value
40 ft-lbs (54 N·m)
Important Notes
Ensure transmission mounts are properly aligned before tightening. Torque all bolts evenly.

Transmission

Torque specifications for various components within the transmission housing.

1

Transmission Oil Pan Bolts

M6 x 1.0
Torque Value
9 ft-lbs (12 N·m)
Important Notes
Tighten bolts in a criss-cross pattern to ensure even sealing. Use a new gasket or sealant as required.
2

Transmission Drain and Fill Plugs

M18 x 1.5
Torque Value
15 ft-lbs (20 N·m)
Important Notes
Use a new crush washer or sealing washer when reinstalling drain plugs. Ensure threads are clean and undamaged.

Driveshaft And Axles

Torque specifications for components relating to the driveshaft and drive axle assemblies.

1

Drive Axle/Half Shaft Bolts (Inner)

M10 x 1.25
Torque Value
40 ft-lbs (54 N·m)
Important Notes
Ensure that the axle flange is flush with the transmission/differential flange. Torque bolts evenly.
2

CV Joint/Axle Nut

M24 x 1.5
Torque Value
180 ft-lbs (244 N·m)
Important Notes
This nut provides crucial wheel bearing preload. Use a new nut if required. Verify torque with calibrated wrench.
3

Propeller/Drive Shaft Bolts

M10 x 1.5
Torque Value
60 ft-lbs (81 N·m)
Important Notes
Tighten bolts evenly in a cross pattern to avoid vibrations. Inspect flange for proper mating surfaces.
4

Center Support Bearing Bolts

M10 x 1.5
Torque Value
35 ft-lbs (47 N·m)
Important Notes
For vehicles with a 2-piece driveshaft. Ensure the bearing is aligned correctly before tightening.

Differential

Torque specifications for differential mounting and service components.

1

Differential Mounting Bolts

M12 x 1.75
Torque Value
70 ft-lbs (95 N·m)
Important Notes
Tighten bolts evenly. Ensure that the differential is properly aligned to the chassis/subframe.
2

Differential Drain/Fill Plug

M18 x 1.5
Torque Value
25 ft-lbs (34 N·m)
Important Notes
Use a new crush washer or sealing washer when reinstalling. Verify threads are clean.

Transfer Case

Torque specifications for components associated with the transfer case, applicable to AWD/4x4 vehicles.

1

Transfer Case Mounting Bolts

M12 x 1.75
Torque Value
60 ft-lbs (81 N·m)
Important Notes
Ensure transfer case is correctly aligned with transmission or frame before tightening.
2

Transfer Case Drain/Fill Plug

M18 x 1.5
Torque Value
15 ft-lbs (20 N·m)
Important Notes
Use a new crush washer or sealing washer when reinstalling. Make sure plug threads are clean and undamaged.

Troubleshooting Guide

Common issues, diagnostic steps, and prevention guidelines

Common Issues

Bolt stretching, stripped threads, uneven torque patterns

Loose Components

Symptoms:
  • Rattling or vibration noises
  • Visible movement in components
  • Uneven panel gaps
Solutions:
  • Clean threads and mounting surfaces
  • Replace damaged fasteners
  • Apply proper torque in sequence
  • Use thread locker if specified

Stripped Fasteners

Symptoms:
  • Unable to achieve proper torque
  • Fastener spins freely
  • Visible thread damage
Solutions:
  • Use thread repair kit if appropriate
  • Install thread insert (HeliCoil)
  • Replace component if threaded hole is damaged
  • Upgrade to higher grade fastener if recommended

Overtightened Components

Symptoms:
  • Cracked or deformed parts
  • Broken fasteners
  • Compressed gaskets or seals
Solutions:
  • Replace damaged components
  • Use new fasteners
  • Follow proper torque sequence
  • Verify correct torque specifications

Diagnostic Steps

Visual inspection, torque verification, thread assessment

1

Visual Inspection

Inspect the affected area for any visible signs of damage or wear

  • Check for cracks or deformation
  • Look for signs of excessive wear
  • Verify proper fastener installation
2

Torque Verification

Verify the torque applied to the fasteners

  • Check the torque wrench calibration
  • Verify the torque specification
  • Compare the applied torque to the specification
3

Thread Assessment

Assess the condition of the threads

  • Check for signs of thread damage
  • Verify the thread type and size
  • Check for proper thread engagement

Prevention Guidelines

Best practices, maintenance tips, tool care

Best Practices

  • Always follow the recommended torque specification
  • Use the correct type and size of fasteners
  • Verify the torque wrench calibration regularly

Maintenance Tips

  • Regularly inspect the affected area for signs of wear or damage
  • Replace damaged or worn-out components promptly
  • Keep the work area clean and organized

Tool Care

  • Regularly clean and maintain the torque wrench
  • Store the torque wrench in a dry and secure location
  • Verify the torque wrench calibration before each use

Frequently Asked Questions

Find answers to common questions about torque specifications

Q1

Why is it important to use the correct torque specifications?

Using the correct torque specifications ensures that fasteners are tightened to the optimal tension. Overtightening can stretch or break bolts, damage components, or strip threads. Undertightening can lead to loose parts, vibrations, and potential failure. For example, an improperly torqued driveshaft bolt could lead to catastrophic drivetrain failure while driving.

Q2

What tools are needed to properly torque drivetrain bolts?

You will need a calibrated torque wrench with the appropriate range for your bolts (usually inch-pounds or foot-pounds), and the correct size and type of sockets. An extension may be needed to reach certain fasteners. Never use an impact gun when final torque is required.

Q3

How often should drivetrain bolts be checked for proper torque?

Generally, you should check drivetrain bolt torque after any maintenance or repair where they were loosened. It's also good practice to check them periodically as part of routine maintenance, especially if you regularly drive in demanding conditions (e.g. heavy loads or off-roading). For a daily driver, checking during each oil change is recommended. If you notice vibrations, clunking, or other noises from the drivetrain, you should check immediately.

Q4

What if I don't have the exact torque specification?

Always use the manufacturer's specified torque values. If you cannot find the information in your owner's manual or a reliable repair guide for your specific vehicle, consult with a professional mechanic. Guessing or using generic torque values for drivetrain components is dangerous and could cause damage or failure. General torque charts may be available online but are not recommended for drivetrain components where critical precision is necessary.

Q5

Can I reuse drivetrain bolts?

In some cases, yes, but it's generally recommended to replace torque-to-yield bolts, especially those on critical drivetrain components like the driveshaft or differential. Torque-to-yield bolts stretch during tightening and lose their clamping force over time. Reusing them can result in a weakened connection and potential failure. Consult your repair manual for specific recommendations on which bolts to replace.

Environmental Considerations

Temperature, humidity, and seasonal effects on torque specifications

Temperature Effects

Includes: High Heat, Cold Weather, Thermal Cycling

Temperature can significantly impact torque values and fastener behavior

Cold Weather

Effects:
  • Increased material brittleness
  • Higher torque required due to thread contraction
  • Reduced thread lubricant effectiveness
Recommendations:
  • Allow components to warm to room temperature when possible
  • Consider using winter-grade thread lubricants
  • Check torque values more frequently during winter months

Hot Weather

Effects:
  • Thermal expansion of components
  • Decreased friction in threads
  • Accelerated lubricant breakdown
Recommendations:
  • Check torque when components are at normal operating temperature
  • Use temperature-resistant thread lockers
  • Consider re-torquing after heat cycles

Humidity and Corrosion

Covers: Rust Prevention, Salt Exposure, Moisture Control

Moisture and corrosion can affect fastener integrity and torque values

High Humidity

Effects:
  • Accelerated corrosion formation
  • Reduced friction coefficient
  • Potential thread seizing
Prevention:
  • Use corrosion-resistant fasteners
  • Apply appropriate anti-seize compounds
  • Maintain proper protective coatings

Salt Exposure

Effects:
  • Rapid corrosion development
  • Thread damage
  • Seized fasteners
Prevention:
  • Regular underbody washing
  • Use of sacrificial anodes where appropriate
  • Application of protective coatings

Seasonal Maintenance

Spring, Summer, Fall, and Winter maintenance schedules

Spring

  • Inspect for winter damage
  • Clean and protect exposed fasteners
  • Check torque on critical components

Summer

  • Monitor heat-affected components
  • Check expansion-related loosening
  • Inspect cooling system mounts

Fall

  • Prepare for winter conditions
  • Apply corrosion protection
  • Verify all fasteners are properly torqued

Winter

  • More frequent inspection of critical fasteners
  • Check for salt damage
  • Monitor suspension component torque

Related Resources

Tools, service procedures, and technical bulletins

Recommended Tools

Torque Wrench

A calibrated torque wrench is essential for accurately tightening bolts to specified values, preventing over-tightening or under-tightening which can lead to component failure or loosening.

  • Accurate torque readings
  • Click-type mechanism for precise torque application
Learn more

Socket Set

A comprehensive socket set with various sizes is needed to fit the different bolts used in the drivetrain.

  • Variety of socket sizes
  • Metric sizing
Learn more

Extension Bars

Extension bars provide access to bolts in recessed or hard-to-reach areas.

  • Various lengths for added reach
  • Durable construction
Learn more

Universal Joint

A universal joint (swivel) adapter can be used to access bolts at awkward angles.

  • Allows angled access to bolts
  • Durable construction
Learn more
Service Procedures

Drivetrain Bolt Torque Specifications

This section details the recommended torque values for various drivetrain bolts on the 2011-2014 Chrysler 200. Note: Always refer to your vehicle's specific service manual for the most accurate and up-to-date information as variations may exist depending on exact model and drivetrain configuration. Improper tightening can lead to serious damage or failure.

  • Identify the specific bolt and location (e.g., axle nut, transmission mount bolt, driveshaft bolts).
  • Refer to the torque specification for that specific bolt (refer to the service manual).
  • Attach the correct socket size to the torque wrench.
  • Set the torque wrench to the correct specification.
  • Apply slow and steady pressure until the torque wrench clicks. Do NOT over-tighten.
  • Repeat for all applicable bolts.
View full procedure

Axle Nut Torque Procedure

This procedure outlines the recommended torque procedure for the axle nuts.

  • Clean threads of the axle and nut.
  • Install new nut if recommended
  • Tighten the axle nut initially to a specified torque value.
  • Loosen the nut.
  • Tighten the nut again to specified torque.
  • If required, tighten an additional angle using a protractor.
View full procedure
Technical Service Bulletins

Potential Issue with Driveshaft Bolts

2013-05-10

Some early production 2011-2012 Chrysler 200 models may experience loosening of the driveshaft bolts due to improper initial torque. This can lead to a vibration and potential failure.

2011-2012

Resolution: Inspect and replace the driveshaft bolts and tighten to correct specification, applying Loctite threadlocker if recommended.

Transmission Mount Bolt Inspection

2012-11-20

Some reports indicate loose transmission mount bolts. Inspect bolts and ensure they are torqued to specification. Replace bolts if they appear worn or stretched.

2011-2014

Resolution: Inspect all transmission mount bolts and tighten to the correct torque specifications. Replace any damaged bolts.

About the Author

Expert automotive knowledge and experience

Alan Montanye - Automotive Technical Specialist
ASE

Alan Montanye

Automotive Technical Specialist

ASE Master Certified Technician with over a decade of hands-on experience in automotive repair and diagnostics.

Facebook Contact
15+ Years
Experience
500+ Guides
Guides
50+ Makes
Vehicles
1000+ Solutions
Solutions

Diagnostic

Specialized in advanced diagnostic techniques using modern scan tools and oscilloscopes.

Repair

Expert in both traditional mechanical repairs and modern vehicle systems.

Additional Expertise

Documentation

Created over 500 detailed repair guides and technical documents.

Training

Conducted technical training sessions and contributed to repair databases.

Certifications & Research

Certifications

  • ASE Master Technician Certification
  • Advanced Diagnostic Specialist
  • Hybrid/Electric Vehicle Systems
  • Performance Tuning Expert

Research & Community

Actively researches emerging technologies and contributes to automotive forums.

Legal Disclaimer

Important information about using this content

Always refer to your vehicle's service manual and take appropriate safety precautions when performing any maintenance or repairs.

General Information
The information provided on this website is for general informational purposes only. While we strive to maintain accuracy in our content, all specifications, procedures, and technical information should be verified against your vehicle's official service manual or with the manufacturer directly.
Warranty & Liability

The content on this website is provided "as is" without any representations or warranties, express or implied. We make no representations or warranties regarding the accuracy, completeness, or availability of the information.

We shall not be liable for any direct, indirect, special, or consequential damages arising from the use of information on this website.

Technical Information
  • All specifications, including torque values, fluid capacities, and maintenance procedures, should be verified against your vehicle's factory service manual.
  • Vehicle specifications and procedures may vary by model year, trim level, and region.
  • Always follow the manufacturer's recommended procedures and safety precautions.
  • Working on vehicles can be dangerous. Always take proper safety precautions and use appropriate safety equipment.
  • If you're unsure about any procedure, consult a qualified professional mechanic.
Intellectual Property
All content, including text, images, and specifications, is protected by copyright and other intellectual property laws. Any unauthorized use or reproduction is prohibited.

© 2025 Chrysler Specs. All rights reserved.

Privacy Policy Terms of Service