Chrysler 200 2011-2014 Body Specifications
Explore detailed body specifications for the 2011-2014 Chrysler 200, including dimensions, weight distribution, and panel details. Ideal for repairs, maintenance, and upgrades.
Overview Specifications
This document provides detailed specifications and technical information about the body design and features of the 2011-2014 Chrysler 200. It is organized into sections covering exterior dimensions, materials, and design elements. Use the search functionality to locate specific details or navigate through the sections for a comprehensive understanding of the vehicle's body specifications.
How to Use
Use the search bar to enter keywords related to specific body features or dimensions. Results will highlight relevant sections and subsections for quick access.
Scroll through the document or use the table of contents to jump to specific sections. Each section is divided into subsections with detailed technical points for easy reference.
Key Specifications
Length
190.7 inches
Width
72.5 inches
Height
58.4 inches
Wheelbase
108.0 inches
Curb Weight
3,500 lbs
Available Specifications
Exterior Dimensions
This section covers the overall exterior dimensions of the 2011-2014 Chrysler 200, including length, width, height, and wheelbase. It also includes details on ground clearance and weight distribution.
Exterior Dimensions
This section covers the overall exterior dimensions of the 2011-2014 Chrysler 200, including length, width, height, and wheelbase. It also includes details on ground clearance and weight distribution.
Overall Dimensions
- Length: 190.7 inches
- Width: 72.5 inches
- Height: 58.4 inches
- Wheelbase: 108.0 inches
- Ground clearance: 5.1 inches
- Curb weight: 3,500 lbs
Weight Distribution
- Front axle weight: 58%
- Rear axle weight: 42%
- Gross vehicle weight rating (GVWR): 4,500 lbs
- Payload capacity: 1,000 lbs
Body Materials
This section provides information on the materials used in the construction of the Chrysler 200's body, including the type of steel, aluminum components, and corrosion-resistant coatings.
Body Materials
This section provides information on the materials used in the construction of the Chrysler 200's body, including the type of steel, aluminum components, and corrosion-resistant coatings.
Material Composition
- High-strength steel used in the frame
- Aluminum hood for weight reduction
- Galvanized steel panels for corrosion resistance
- Plastic composite bumpers
Corrosion Protection
- Electro-galvanized steel body panels
- Anti-corrosion undercoating
- Drainage channels to prevent water accumulation
- Rust-resistant fasteners
Design Features
This section highlights the design elements of the Chrysler 200, including aerodynamic features, lighting, and exterior styling details.
Design Features
This section highlights the design elements of the Chrysler 200, including aerodynamic features, lighting, and exterior styling details.
Aerodynamics
- Drag coefficient of 0.29
- Active grille shutters for improved airflow
- Sculpted body lines for reduced wind resistance
- Rear spoiler for enhanced stability
Lighting
- Projector-beam halogen headlights
- LED daytime running lights
- LED taillights with sequential turn signals
- Fog lights integrated into the front bumper
Styling
- Chrome-accented grille
- Body-color side mirrors
- 17-inch alloy wheels (standard)
- Dual exhaust tips
Search Specifications
Search by specification name, value, or description
Type to search through torque specifications. Results will appear below as you type.
Component Specifications
Overview
- Type
- Sedan
- Configuration
- 4-door
- Platform
- Chrysler JS platform
- Material
- High-strength steel
- Location
- Toledo Assembly Complex, Ohio, USA
Dimensions
- Length
- 192.3 inches (4884 mm)
- Width
- 72.5 inches (1841 mm)
- Height
- 58.4 inches (1483 mm)
- Wheelbase
- 108.0 inches (2743 mm)
- Curb Weight
- 3472 lbs (1575 kg)
- Ground Clearance
- 5.1 inches (130 mm)
- Trunk Capacity
- 13.6 cubic feet (385 liters)
Materials
- Frame
- High-strength steel with reinforced crumple zones
- Body Panels
- Galvanized steel with corrosion-resistant coating
- Roof
- Steel with sound-deadening material
- Windows
- Laminated safety glass
Features
- Exterior
-
- Aerodynamic design
- Chrome-accented grille
- Integrated fog lights
- LED taillights
- interior
-
- Leather-wrapped steering wheel
- Soft-touch dashboard materials
- Ambient interior lighting
- Dual-zone automatic climate control
- Lighting
-
- Halogen headlights
- LED daytime running lights
- Automatic headlight control
- Storage
-
- Center console storage
- Glove compartment
- Door pocket storage
- Rear seat pass-through
- Convenience
-
- Keyless entry
- Power-adjustable driver's seat
- Remote start system
- Power windows with one-touch operation
Safety Features
- Structural
-
- Reinforced side-impact beams
- Energy-absorbing steering column
- Crash-optimized front structure
- Airbags
-
- Dual front airbags
- Side-curtain airbags
- Front seat-mounted side airbags
- Active Safety
-
- Electronic Stability Control (ESC)
- Traction Control System (TCS)
- Anti-lock Braking System (ABS)
Comfort Features
- Seating
-
- Heated front seats
- 8-way power-adjustable driver's seat
- Leather-trimmed seats
- Climate
-
- Dual-zone automatic temperature control
- Rear-seat ventilation ducts
- Air filtration system
- Noise Reduction
-
- Acoustic laminated windshield
- Sound-deadening materials in doors
- Engine compartment insulation
- Visibility
-
- Electrochromic rearview mirror
- Rain-sensing windshield wipers
- Heated side mirrors
Accessories
- Exterior
-
- Rear spoiler
- Chrome door handles
- Body side moldings
- interior
-
- All-weather floor mats
- Cargo net
- Center console organizer
- Lighting
-
- LED interior lighting kit
- Fog light kit
- Puddle lamps
Maintenance
- Service interval
- Every 7,500 miles or 6 months
- Service Items
-
- Inspect and lubricate door hinges
- Check body panel alignment
- Inspect weatherstripping
- Clean and condition leather seats
- Wax exterior surfaces
- Maintenance Notes
- Regular washing and waxing recommended to maintain paint finish. Inspect for rust or corrosion annually.
Warranty
- Basic
- Miles: 36,000Years: 3Coverage: Bumper-to-bumper
- Powertrain
- Miles: 60,000Years: 5Coverage: Engine, transmission, drivetrain
- Corrosion
- Miles: 100,000Years: 5Coverage: Perforation from corrosion
- Roadside Assistance
- Miles: 36,000Years: 3Coverage: 24/7 emergency services
Production Details
- Manufacturer
- Chrysler Group LLC
- Manufacturing Process
-
- Robotic welding
- Electro-coating for corrosion protection
- Precision panel alignment
- Quality Control
- inspection Stages: 5Final Check: Laser-guided measurement systemPaint Quality: 7-layer paint process
- Sustainability Practices
-
- Recycled materials in interior components
- Water-based paint system
- Energy-efficient manufacturing processes
- Production Metrics
- Units Per Day: 800Production Time: 22.5Defect Rate: 0.8%
Service Information for body Service
Maintenance and service requirements specific to the body
- Inspect door hinges and lubricate
- Check body panel alignment
- Inspect weatherstripping for wear
- Clean and condition leather seats
- Wax exterior surfaces
Use only approved cleaning products for interior surfaces
- Inspect for rust or corrosion
- Check all exterior lighting
- Inspect windshield wiper blades
- Verify proper door seal operation
- Check trunk latch mechanism
Pay special attention to areas prone to stone chips
- Full body inspection for damage
- Check all body mounts and bushings
- Inspect underbody for damage
- Verify proper hood and trunk alignment
- Check for paint defects or fading
Professional detailing recommended at this interval
Frequently Asked Questions
Find answers to common questions about torque specifications
Q1 What are the technical specifications for the 2011-2014 Chrysler 200 body components?
What are the technical specifications for the 2011-2014 Chrysler 200 body components?
The 2011-2014 Chrysler 200 features a unibody construction with dimensions of approximately 190.6 inches in length, 72.5 inches in width, and 58.4 inches in height. The body is compatible with OEM and aftermarket parts designed for this model range. Key specifications include a wheelbase of 108 inches, a curb weight of 3,400 to 3,600 lbs, and a drag coefficient of 0.30. Ensure compatibility by verifying part numbers with the manufacturer or dealer.
Q2 What maintenance is required for the Chrysler 200 body?
What maintenance is required for the Chrysler 200 body?
Regular maintenance for the Chrysler 200 body includes washing and waxing every 2-3 months to protect the paint. Inspect and clean door seals, hinges, and undercarriage to prevent rust. Check for dents, scratches, or corrosion annually. Replace worn-out weather stripping and ensure proper alignment of body panels. Follow the owner’s manual for specific intervals and use only recommended cleaning products to avoid damage.
Q3 How do I replace a damaged body panel on the Chrysler 200?
How do I replace a damaged body panel on the Chrysler 200?
To replace a damaged body panel, first, remove the fasteners and trim pieces securing the panel. Disconnect any electrical components, such as lights or sensors. Carefully detach the panel and align the new one. Secure it with the appropriate fasteners and reconnect electrical components. Test functionality and ensure proper fitment. For precise instructions, refer to the service manual or consult a professional technician.
Q4 What should I do if my Chrysler 200 body has alignment issues?
What should I do if my Chrysler 200 body has alignment issues?
If your Chrysler 200 body has alignment issues, inspect for loose or damaged fasteners, worn bushings, or bent components. Tighten or replace as needed. Check the suspension and frame for damage, as these can affect body alignment. Use a professional alignment tool or consult a technician to ensure proper adjustment. Misaligned panels can lead to wind noise, water leaks, or uneven wear.
Q5 How can I optimize the performance of my Chrysler 200 body?
How can I optimize the performance of my Chrysler 200 body?
To optimize performance, ensure all body panels are securely fastened and aligned. Use aerodynamic accessories like spoilers or diffusers to reduce drag. Regularly clean the undercarriage to prevent rust and debris buildup. Apply a protective coating to the paint to maintain its finish. Avoid overloading the vehicle, as excess weight can strain the body and suspension components.
Factory Service Resources
Access official service manuals, technical documents, and repair guides. These resources provide detailed procedures, specifications, and diagrams directly from the manufacturer.
2011-2014 Chrysler 200 Service Manual
Coming SoonComprehensive guide covering maintenance, repair, and troubleshooting for the Chrysler 200 body and other components.
Technical Service Bulletin: Body Panel Alignment
Coming SoonDetails common alignment issues and recommended fixes for the 2011-2014 Chrysler 200 body panels.
Chrysler 200 Parts and Accessories Catalog
Coming SoonCatalog listing OEM and aftermarket parts, including body panels, trim, and accessories for the 2011-2014 Chrysler 200.
About the Author
Expert automotive knowledge and experience
'/%3E%3Cpath d='M60 30a20 20 0 1 1 0 40 20 20 0 0 1 0-40zm0 45c16.5 0 30 7.5 30 16.8V100H30v-8.2c0-9.3 13.5-16.8 30-16.8z' fill='%23404040'/%3E%3C/svg%3E)
Diagnostic
Specialized in advanced diagnostic techniques using modern scan tools and oscilloscopes.
Repair
Expert in both traditional mechanical repairs and modern vehicle systems.
Additional Expertise
Documentation
Created over 500 detailed repair guides and technical documents.
Training
Conducted technical training sessions and contributed to repair databases.
Certifications & Research
Certifications
- ASE Master Technician Certification
- Advanced Diagnostic Specialist
- Hybrid/Electric Vehicle Systems
- Performance Tuning Expert
Research & Community
Actively researches emerging technologies and contributes to automotive forums.
Legal Disclaimer
Important information about using this content
Always refer to your vehicle's service manual and take appropriate safety precautions when performing any maintenance or repairs.
General Information
Warranty & Liability
The content on this website is provided "as is" without any representations or warranties, express or implied. We make no representations or warranties regarding the accuracy, completeness, or availability of the information.
We shall not be liable for any direct, indirect, special, or consequential damages arising from the use of information on this website.
Technical Information
- All specifications, including torque values, fluid capacities, and maintenance procedures, should be verified against your vehicle's factory service manual.
- Vehicle specifications and procedures may vary by model year, trim level, and region.
- Always follow the manufacturer's recommended procedures and safety precautions.
- Working on vehicles can be dangerous. Always take proper safety precautions and use appropriate safety equipment.
- If you're unsure about any procedure, consult a qualified professional mechanic.